How to replace Bushing in your Rotary Drum Screen
Turn off the power to the motor to make sure the machine cannot start;
Unscrew the bolts in order to open the frontal support.
Remove the old bushing and put on the new one.
Related Articles
How to replace the Gearmotor on your rotary drum screen
Make sure the machine cannot start itself for any reason. Disconnect the motor wires and all the hydraulic connections. Open all the cover and clean with plenty of water. Unscrew the bolts of the collar of the foot. Unscrew the bolt in the back of ...How to replace Brush in your Rotary Drum Screen
Turn of the power to the motor to make sure the machine cannot start; Unscrew the bolts that keeps the brush support connected to the machine (1). Remove the old brush and put on the new one.How to disassemble the PerfoDrum Screen and replace FIfth Wheel
OVERVIEW The unit is bolted to the ground with anchor bolts. In-Tank: You disconnect drum transport conveyor assembly, lift it up and drop it to the floor to gain access to to the motor and gearbox area to perform work. In-Channel: You tilt the ...How to run routine Maintenance on DSS-T in Tank Screen Screw
1. BRUSHES REPLACEMENT Disconnect the Main Power Supply Make sure the machine cannot start itself for any reason. Disconnect the motor wires and all the hydraulic connections. Open all the cover and clean with plenty of water. Unscrew the bolts of ...How to Replace Perfordrum wheels
FIRST THING: SAFETY. SHUT DOWN THE POWER. REF. Serial 2388 1ST STEP: UNBOLT TANK CONVERS AND REMOVE THEM 2ND STEP: UNSCREW THE THREE SCREWS ON BOTH SIDES OF THE TANK 3RD STEP: HOOK THE TWO LIFTING POINTS TO CHAINS IN ORDER TO LIFT THEM UP. SUPPORT ...