How to mount a level sensor on an in-tank screen
Find the threaded hole, usually a 2" NPT, and thread in your sensor.
use teflon tape to maintain a nice seal.
The sensor and the equipment itself must be properly grounded as per the sensor installation instruction.
Related Articles
How to Select a flowmeter
Flowmeter selection must consider a few parameters. Siemens has an excellent guide on liner and electrode selection, which is attached to this article. Power Supply The power supply voltage which can be 24VDC/24VAC or 120VAC. The simplest is to use ...How to remove the stator from the rotor on a progressive cavity pump.
Dismantling pipe-connection – stator – pump body Make sure the equipment is disconnected from power and hydraulic connections. a) Unscrew the two nuts and washers (20 e 21 fig. 2-9) that fasten the pipe-connection. b) Remove the pipe-connection (4 ...How is the Multirake Comb mounted
The Multirake operates with no bottom sprocket