How to adjust shutdown run time or conveyor run time on CBB HMI
This is password protected and the password changes randomly everyday and must be generated by us.
Contact DRYCAKE support for further assistance.
How to Enter PASSWORD:
1. With decanter stopped, go to page of the Password and Connection HMI reported below, click on the button bottom right (red). A Pop-up appears.
2. Upon Pop-up, as depicted below, insert the values indicated following the numeric chronology (First enter 1 Then 2 Then 3 Then 4 Then 5)
3. END!
Related Articles
How to Adjust pneumatic cone Screw press
Adjust actuator as belowHow to Run the Draimad
There are two videos that show the operational aspects of the Draimad DRAIMAD: RUNNING THE DRAIMAD DRAIMAD: O&M TRAININGHow to check rotation of the Scraper on centrifuge
The rotation of the blades of the scraper system should turn counter-clockwise (same direction as the main motor fan) If this is not the case check 1.General Power Polarity Maybe the incoming power polarity needs to be changed. This can be verified ...How to schedule maintenance on my centrifuge
Maintenance Component Maintenance Task Interval Duration Transmission belt Check belt tension Every 800-1000 working hours 30min. Replace belt Every 10000 working hours 2 hours Bearing Grease Every 100 working hours 15min. Check integrity Every 2500 ...How to Remotely Control Centrifuge
Remote Connection In order to satisfy customer’s necessities and in order to help at the best on the resolution of possible issues, it is possible to activate two different systems for the remote connection: VNC and VPN. The first one allows to ...