Mechanical
How to schedule maintenance on my centrifuge
Maintenance Component Maintenance Task Interval Duration Transmission belt Check belt tension Every 800-1000 working hours 30min. Replace belt Every 10000 working hours 2 hours Bearing Grease Every 100 working hours 15min. Check integrity Every 2500 ...
How to remove the rotating assembly from the centrifuge
Important Before commencing the work to replace the bearing, make sure that the machine is off and put in the safety position(control panel is not powered). To lift out the rotating assembly, in order to for example replace the bearings, loosen the ...
How to find weight of Bowl & Scroll Rotating Assembly for transport and lifting
The weights per model are: DR800 - Complete rotor (bowl, screw)= 4315kg - Complete rotor, front support and rear support = 4895kg (4315kg, 290kg, 290kg) - Complete rotor, front support and rear support, gearbox = 5555kg ...
How to go from 3 to 2 phase with the Decanter Centrifuge with the kit?
If your Decanter Centrifuge was ordered with a special kit, it can be changed from 2 to 3 phases and vice versa From 3 to 2 phases 1. Replace the oil levels with the plugs; ensure that there are O-rings on the plugs 2.Remove weir plates ...
How to determine clearance between scroll and bowl
DR100/CD10 to DR450/CD45 is 1mm DR500/CD50 to DR800/CD80 is 1.5mm